Plastering & Drylining Inspection Service
Ensuring Flawless Finishes for Your Property
The surface of walls and ceilings needs to be flawless. Our Plastering & Drylining inspections find defects before they get worse. Wall levels, board alignment, and joint quality are checked. We test the smoothness and thickness of the surface. We check for cracks, bulges, and gaps. We check that fillers and tapes are used correctly. The process is simple, and we provide clear results within 24–48 hours. We rank defects by risk and guide your repair plan. Our team ensures Dubai code compliance and thus assists you in keeping your interiors perfect.
Why Plastering & Drylining Inspection Matters
Cracks and visible defects after painting are created by uneven plaster and drylining. Over time, these poorly finished joints will bulge, debond and fail. Moisture is allowed to penetrate walls and ceilings through hidden gaps. When a house is damaged, it can lead to mold and structural decay. Drylining in high‑rise buildings in Dubai is a necessity as part of the building code regulations that set out fire safety and acoustic requirements. As per RERA, walls and ceilings must be within strict tolerances at handover. A professional inspection allows you to discover flaws in workmanship that a developer may overlook. Early fixes are far less costly and maintain interior aesthetics.
What We Inspect
Our thorough inspection covers every aspect of plastering and drylining work:
- Wall & Ceiling Levels: We measure vertical and horizontal surfaces for level tolerances. We ensure walls are plumb and ceilings are flat.
- Board Alignment & Fixing: We check that plasterboards and drylining panels are correctly fastened. We look for loose or over‑driven screws.
- Joint Treatment & Tape Work: We inspect joint fillers and tape placement. We verify smooth transitions and correct thickness.
- Surface Finish & Smoothness: We examine the final skim coat for uniform texture. We identify trowel marks, ridges, and uneven spots.
- Crack & Bulge Detection: We look for hairline cracks, popping at joints, and bulges indicating poor adhesion.
- Moisture & Bond Integrity: We test moisture levels behind boards. We check for signs of delamination or debonding.
Our Four‑Step Inspection Process
- Consultation: We discuss your project scope, past work, and any visible concerns. We schedule at your convenience.
- On‑Site Assessment: Certified inspectors use levels, moisture meters, and visual checks to examine all surfaces.
- Technical Testing: We perform pull‑off adhesion tests on skim coats. We measure board deflection under load.
- Reporting & Recommendations: Within 24–48 hours, you receive a digital report with annotated photos. We list defects and propose repair methods.
Statistics & Overview
Extensive repulsive belonging depending if promotion be zealously as.
Common Defects Identified
- Out‑of‑Level Walls causing uneven paint and wallpaper finishes.
- Over‑filled Joints leading to ridges and visible lines after painting.
- Under‑filled Corners that crack under slight movement.
- Screw Pops where fasteners work loose and surface bulges.
- Delamination of skim coat due to trapped moisture.
- Uneven Thickness of plaster causing shadow lines under lighting.
Benefits of Our Service
- Quality Assurance: Confirms that interior finishes meet manufacturer and code standards.
- Safety: Detects moisture paths that could lead to mold growth and structural issues.
- Cost Savings: Early repairs cost far less than redoing large areas later.
- Compliance: Meets RERA snagging requirements and Dubai Municipality tolerances.
- Aesthetic Excellence: Ensures smooth, flawless walls and ceilings for painting or decoration.
- Peace of Mind: Provides clear, actionable guidance and free follow‑up support.
Compliance and Quality Standards
We follow Dubai Municipality’s Green Building Regulations for interior finishes. We adhere to RERA’s snagging checklist for level tolerances and joint quality. We apply InterNACHI best practices for plaster and board inspections. Our tools are calibrated to DEWA standards for moisture and adhesion testing.
Why Choose Dubshy
Dubshy is DED‑licensed and RERA‑approved for property inspections in Dubai. Our engineers hold InterNACHI certification and specialized training in plastering and drylining. We have completed over 15,000 inspections with rapid 24–48 hour report delivery. We communicate findings in simple, jargon‑free language. We offer free follow‑up support to ensure repairs meet safety and quality standards.
Preparation Tips
- Remove furniture away from walls and cover floors to protect finishes.
- Ensure work areas are accessible and lighting is on.
- Provide any existing snag lists or past inspection reports.
Frequently Asked Questions
How long does the inspection take?
Most plastering & drylining inspections finish in 2–3 hours, depending on property size.
Do I need to move belongings?
Clearing furniture speeds the process. We can work around large items if needed.
What if major defects are found?
We categorize defects by risk and recommend qualified contractors for repairs.
Is this inspection required by law?
Dubai law advises interior finish checks for safety and quality but does not strictly mandate them. It is highly recommended for handover.
Ready for Perfect Walls?
Book your Plastering & Drylining Inspection with Dubshy today. Get a detailed report in 24–48 hours and ensure flawless interior finishes.